第 1/2 張圖片
圖片庫
第 1/2 張圖片
有類似物品要出售？
6400-06-10 -10AN O-RING TO -6 37 DEG FLARE FITTING RMR-090-
FITTING FOR OUR -10 FUEL RAILS
US $4.50
大約HK$ 35.15
狀況：
至少還有 10 件賣出 9 件
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
運送：
US $15.80（大約 HK$ 123.42） UPS Ground.
所在地：Belcamp, Maryland, 美國
透過合併運送節省運費
送達日期：
估計於 8月29日 (星期五)至 9月4日 (星期四)之間送達 運送地點 94104
退貨：
14 日退貨. 由買家支付退貨運費，如果你使用 eBay 郵寄標籤，相關費用將從你的退款金額中扣除.
保障：
請參閱物品說明或聯絡賣家以取得詳細資料。閱覽全部詳情查看保障詳情
（不符合「eBay 買家保障方案」資格）
物品細節
- 物品狀況
- 全新
- Manufacturer Part Number
- RMR-090
- Country/Region of Manufacture
- United States
- Brand
- ROSS MACHINE RACING
賣家提供的物品說明
賣家信用評價 （3,864）
- a***a (51)- 買家留下的信用評價。過去 1 個月購買已獲認證The fuel injector bung appeared to be correct until I tried an LV1 and LV6 injector in the recess and discovered it was machined too deeply. The lower o-ring doesn't seat on the lip on the inside diameter.. The depth should be between 7.5mm and 7.75mm. The machined depth of these is 12.61mm. In both of the injectors the case of the injector hits the top edge of the bung preventing the o-ring from contacting the machined lip on the ID. I don't recommend this manufacturer/seller..
- 5***n (1411)- 買家留下的信用評價。過去 1 個月購買已獲認證great quality Thank you
- r***a (1800)- 買家留下的信用評價。過去 1 個月購買已獲認證A
賣家信用評價 （3,864）
- a***a (51)- 買家留下的信用評價。過去 1 個月購買已獲認證The fuel injector bung appeared to be correct until I tried an LV1 and LV6 injector in the recess and discovered it was machined too deeply. The lower o-ring doesn't seat on the lip on the inside diameter.. The depth should be between 7.5mm and 7.75mm. The machined depth of these is 12.61mm. In both of the injectors the case of the injector hits the top edge of the bung preventing the o-ring from contacting the machined lip on the ID. I don't recommend this manufacturer/seller..
- 5***n (1411)- 買家留下的信用評價。過去 1 個月購買已獲認證great quality Thank you
- r***a (1800)- 買家留下的信用評價。過去 1 個月購買已獲認證A